YES, THIS ADAPTER DOES WORK ON THE GEN 2 WALL CONNECTOR..... Please read this article
Tesla compatible J1772 adapter with 20 foot 40 AMP UL Rated cable.
With this adapter cable you can charge your non-Tesla EV on a Tesla Destination, UMC, or Wall Connector charger.
The adapter has a special circuit that allows it to work on any current Tesla charger including Destination Chargers.
This adapter cable has all of the pins needed to maintain all functionality and safety protocols used by UMC and J1772 charging systems.
This is compatible with all portable and stationary chargers from 110-250VAC.
It is recommended that you verify that the charger you are connecting to does not exceed your EV's voltage rating.
Special lengths are available at $4.00 per foot up to 100 feet.
To the best of our knowledge the adapter should be compatible with any vehicle that uses the J-1772 connector and protocols up to 9.6 KW.
The TeslaTap will work on ALL EV's made in the US *
The TeslaTap has been tested on the following:
Audi A3 E-Tron
BMW X5 xdrive40e
Chevrolet Spark EV
Chrysler Pacifica Hybrid *
Ford C-max Energi
Ford Focus Electric
Ford Fusion Energi
Honda Accord Plug-in Hybrid
Hyundai Sonta Plug-In Hybrid
Jaguar I Pace **
Kia Soul EV
Mercedes C350 Plug-in Hybrid
Mercedes S550 Plug-in Hybrid
Porsche Panamera S e-Hybrid
Porsche Cayenne S E-Hybrid
Porsche 918 Spyder
Smart ForTwo Electric Drive
Toyota Prius Plug-in
Toyota Prius Plug-in Hybrid
Toyota Prius Prime (Plug-in Hybrid)
Volvo XC90 T8
* Through thorough testing we have learned that the TeslaTap will work on Pacifica's and Honda's with the following exceptions:
If using a High Power Wall Connector it must not be set for over 80 AMPS or under 32 AMPS.
Only compatible with some of the new Tesla Model 3 UMC's and you must use only the NEMA 14-50 or 5-15 connector.
This adapter is NOT COMPATIBLE and is not to be used with the Tesla Super Charger Network.
TeslaTap - 20 Foot 40 AMP
- Product Code: TeslaTap - 20 Foot 40 AMP
- Availability: In Stock